Browse Shop

+ Bodies
+ Necks
+ Hardware & Parts
- - Hardware
- - Bridges & Tailpieces
- - Tuning Machines
- - Nuts & Saddles
- - Screws, Nuts & Washers
- - Knobs
- - Pickup Rings & Covers
- - Trussrods
- - Inlays
- - Metric Parts
+ Pickguards
+ Electronics
+ Kits
+ Strings
Fret Wire
+ Accessories
+ Relic Parts
Genuine Fender
+ Clearance

Manufacturers

Basket - UK (£)

0 item(s) in basket
Total:£0.00

Currency Convertor:

This item has been
added to your basket.

Adverts

Bestsellers

VINTAGE SINGLE COIL PICKUP SCREW NICKEL (BAG OF 8

£1.02 inc. VAT

Premium 500k Split Shaft Pot 10% Tolerance

£4.96 inc. VAT

Sprague 'Orange Drop' 0.022 Capacitor

£1.96 inc. VAT

Premium 250k Split Shaft Pot 10% Tolerance

£4.96 inc. VAT

Premium 500k Long Shaft Pot 10% Tolerance

£7.96 inc. VAT

Home -
Hardware & Parts -
Nuts & Saddles -
Locking Nuts -
ROLLER NUT CHROME

WD Music ROLLER NUT CHROME

more products by WD Music

1 In Stock
Ref. Code: RNCR

£7.20 inc. VAT

Average: 5.00 (1 review(s))
(Click here to review this product)

Roller string nut, 42.5mm x 11.8mm outer measurements, requires modification to the neck, reduces the friction of the strings as they pass over the nut - intended for use in conjunction with a trem system. 3 rollers - 2 strings per roller. Held on with two screws - 27mm centre to centre of the two holes. Screws included. 35mm centre to centre of the two outer string slots (low E to high E).

This product has no reviews added yet.

Listed above are the reviews for this product as written by other customers. If you would like to add your own review, please complete the form below and click 'Submit'. Please note all fields that have a star ( * ) are required.

Select Rating: *
Your Name: *
Your Email: *
Review / Comment: *

Rating	Review / Comment	Submitted by

	One of the best roller nuts for tuning stability, and quite cheap too. Best suited for flatter radius fingerboards, due to being perfectly straight (rounder fingerboards will leave the outer E string too high, or the inner strings touching the first fret). Ideal for flatter radius non-locking superstrats, like the Ibanez SA range (for which it is a perfect fit in width and height). The 42.5mm width means it will be a little narrow on 43mm wide necks (at nut), and a fraction over on 42mm necks. A good compromise. The roller action is smoother than on some other roller nuts i've tried, and also has the advantage that they are quite slippy too, so aren't completely reliant on the rollers for tuning stability. As no lateral movement either, which can be a problem on some roller nuts.	Darran Smith 13/10/07 at 08:11 PM