A lot of the competition that stock CTS tend not to carry the top-spec. ones that we have. The 450 Series feature a brass bushing and shaft, a custom audio taper for greater accuracy, a graphite wiper and +/- 9% tolerance for greater consistency. These are developed using ±9% tolerances and a value at 10% over the standard ohms rating (275 kohms instead of 250 kohms). This ensures not only optimum performance, but guarantees your potentiometers will always be at least the value stated. Come complete with two nuts and washers.
Here's what one happy customer had to say about our CTS pots - " I have to say that the CTS pots that I have received have been a revelation to the guitars tone. It is now clearer than ever as well as being less susceptible to background noise. On top of this the smoothness of the tapers exudes quality and they are well worth the asking price."
Total pot depth - 30mm
Length of threaded shaft - 9mm
Shaft diameter - 9.5mm (please ensure that the pickguard / control plate that the pot is mounting onto has a 9.6mm diameter hole)
Base of pot diameter - 23.5mm
Guitarists are notorious for their “do-it-yourself” attitude towards instrument maintenance and customisation. Most of us won’t hesitate to take our guitar apart at the first opportunity if it means avoiding prohibitive bench fees at the local repair shop. There are definitely conditions that call for professional intervention, but with a little bit of knowledge there’s no reason that many of us can’t handle some of the simpler tasks involved in maintaining, repairing, and customising our guitars.
Replacing guitar electronics is a fairly straightforward task that can be successfully handled with minimal effort. All you really need are some basic soldering skills and you’re ready to go. Most conventional guitar circuits consist of pickups, switches, guitar pots, capacitors and a jack. The hardest part is determining what value of potentiometer you need for your instrument. With that in mind, let’s take a look at some of the determining factors that will help you make an informed decision when it comes time to replace a volume or tone pot.
Basic rule of thumb goes like this: single coil pickups get a 250k (275k) guitar pot, humbuckers get a 500k (550k) guitar pot. Why is this? The higher the value of the pot, the brighter the sound, so higher value pots are used with humbuckers to allow a bit more high end to get through with what is, by design, a warmer sounding pickup. Lower value pots are used with brighter sounding pickups to tame some of the extended high end that is associated with single coils.
As a potentiometer is turned fully down, all of the signal from the pickup(s)is diverted to ground, resulting in no output from the instrument. When the guitar pot is turned up to full volume, the resistance of the potentiometer theoretically prevents any of the output signal leaking to ground, and weakening the output signal. Lower value guitar pots, however, do not completely block the signal from leaking to ground even when turned up all the way, so using a 250k potentiometer will result in a slight loss of high frequency, as well as volume. This may please some musicians who want a mellower tone, but for those seeking ultimate purity of signal, a higher value guitar pot may be just what is needed. The higher the value, the more leakage is blocked from ground, which allows more of the signal to be sent to the output. A 500k guitar pot may be just right, but a 1meg ohm pot will provide an all out sonic assault. Higher highs; lower lows; more volume – a rocker’s dream! The only drawback of going to this higher value is the perceived range and sweep of the control. It’s like going from 0 to 10 without the fine increments of control in between.
The Telecaster is a good example of guitar potentiometers determining the overall sound of an electric instrument. The earliest Telecasters utilized 1meg ohm guitar potentiometers. They were deemed too bright to be practical for a wide range of musical styles. As a result, the potentiometers were changed to 250k to “bleed off” some of the extreme treble “twang” that the early versions were known and loved for (Stratocasters also use 250k guitar pots for the same reason). Some Gibson laptop guitars had 5 meg ohm pots. Talk about bright!
To find out if switching to a higher value pot might benefit you, try this simple test: Disconnect your pickup(s) from the circuit, and use some “jumper” wires to connect them directly to the output jack. If the pickups sound louder and fuller, then you will benefit from a higher value potentiometer. If, however, your pickups still aren’t sounding the way you’d like them to, maybe you should take a look at our Kent Armstrong replacement pickups!
A question that we are always being asked is what is the difference between Linear and Log pots? Linear pots increase the impedance evenly as you turn them up. So, if you were to turn a Linear pot from 0 up to 5 (in other words from off position up to mid way) then the impedance is increased by half. However, the human ear doesn’t actually hear this as a gradual volume increase, instead it sounds like nothing much happens for most of the sweep and then all of a sudden there is a huge jump in volume. This is where Log guitar pots come in. Log is short for Logarithmic and is quite often referred to as Audio Taper or A Taper. Log guitar pots are used specifically for audio applications and are adapted to the human ear so that the entire sweep of the pot sounds like a gradual increase, offering a greater degree of control and accuracy when used on a guitar or bass. Most guitar manufacturers use Log pots for both volume and tone controls on their instruments and they are by far the most popular choice amongst musicians when purchasing replacements. This is the reason why most of the guitar pots you see on our site are labelled as having a logarithmic taper.
To our valued customers,
We are closely monitoring the developments of the COVID-19 virus and taking every precaution to keep our employees & wider society safe during these unprecedented times. We all must do our part to help reduce the spread of the virus and exposure to our communities.
While we will be running with an extremely streamlined staff at the warehouse, our sales team will still be able to answer calls and e-mails from their homes. Therefore, at this time there will be no changes in order fulfilment, however there is the chance of slight shipping delays.
Customer service and product information services are still available but If we become aware of any changes that will affect our customers, we will update you as soon as possible.
We would like to take this opportunity to thank you all for your dedication, support and solidarity as we make our way through this difficult situation. We hope you all stay safe, healthy and keep the music playing.
Our standard shipping terms:
Any order placed before 3.00pm on a working day will generally be sent the same day. If the order is placed after 3.00pm on a weekday or anytime during the weekend or a public holiday we will send the order the next working day.
If you need to return a product purchased from W.D. Music UK, please notify us in writing (email/letter) within 14 working days and then return the item to us within 28 working days in order to receive a full refund without the original delivery charge. The cost of returning the item to W.D. Music UK is not included unless the return is due to missing or faulty parts.
The returned goods must be in a re-saleable state and any goods or accessories that accompany the returned product must also come back to us. The goods should also be returned with their original box, packing and accessories. Please click here for further details.
PICKGUARDS: Do not remove the protective cover or place any components on this pickguard until you have made a "dry run" on the instrument. Make sure all mounting holes and pickup cuts are positioned correctly. Pickguard replacement warranty will be void if the protective cover has been removed. Removing the protective film means that the item is not in a re-saleable condition and therefore we cannot accept it back for a refund.
We offer Paypal as the payment gateway on our website.
PayPal accepts all major credit and debit cards and no cardholder information is ever passed unencrypted and any messages sent to our servers from PayPal are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to PayPal's servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.
When you pay with Paypal, all information is protected by SSL with an encryption key length of 168 bits (the highest level commercially available). Your personal information is stored on Paypal's servers and heavily guarded, both physically and electronically. To further shield your credit card and bank numbers, Paypal do not directly connect their firewall-protected servers to the internet.