Nickel finish and sold as a set of 4. Featuring long stems with riveted ears, fine gear action and reverse wind operation just like the pre-CBS originals, these Gotoh vintage bass machine heads will retrofit most original and reissue Fender bass instruments. Comes complete with push-fit bushings and mounting screws. 26:1 gear ratio. Also sold by Fender under the part code 004-1363-000, we import these directly from Gotoh in Japan and, unlike all of the other machine heads that Gotoh supply to us, these tuners don't come in any pre-packaged Gotoh box.
Please note that being 100% vintage correct, these tuners have two small lugs that protrude from the rear of the mounting plate that can cause the tuner to not sit flat against the headstock, just like you would find on an original Fender bass. In 1964 Fender started to put small recesses in the back of the headstock so that the tuners would sit flush on the bass. We recommend undertaking a similar procedure when fitting these bass tuners to your headstock if your bass doesn't already have the recesses.
Any order placed before 3.00pm on a working day will generally be sent the same day. If the order is placed after 3.00pm on a weekday or anytime during the weekend or a public holiday we will send the order the next working day.
If you need to return a product purchased from W.D. Music UK, please notify us in writing (email/letter) within 14 working days and then return the item to us within 28 working days in order to receive a full refund without the original delivery charge. The cost of returning the item to W.D. Music UK is not included unless the return is due to missing or faulty parts.
The returned goods must be in a re-saleable state and any goods or accessories that accompany the returned product must also come back to us. The goods should also be returned with their original box, packing and accessories. Please click here for further details.
PICKGUARDS: Do not remove the protective cover or place any components on this pickguard until you have made a "dry run" on the instrument. Make sure all mounting holes and pickup cuts are positioned correctly. Pickguard replacement warranty will be void if the protective cover has been removed. Removing the protective film means that the item is not in a re-saleable condition and therefore we cannot accept it back for a refund.
We offer two payment gateways on our website - SagePay and Paypal.
SagePay accepts all major credit and debit cards. All transaction information passed between the WD Music and Sage Pay system is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to our servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.
When you pay with Paypal, all information is protected by SSL with an encryption key length of 168 bits (the highest level commercially available). Your personal information is stored on Paypal's servers and heavily guarded, both physically and electronically. To further shield your credit card and bank numbers, Paypal do not directly connect their firewall-protected servers to the internet.