Replacement vintage style Stratocaster guitar neck, made in Japan. This neck has a slightly flatter-than-vintage spec. 9 1/2" (240mm) fingerboard radius to allow for easier string bending.
Please note that this Strat guitar neck comes completely fretted and with the nut slot already cut. However, the nut itself does not come with the neck and needs to be ordered separately. Neck mounting holes are not drilled. The tuning machine holes are drilled to take vintage tuners such as our vintage Kluson tuners or similar. For contemporary tuners like Sperzel, Gotoh, Grover, the holes in the headstock will need to be widened to 10mm.
All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.
WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.
Important Information -
Width of neck at nut slot - 42mm
Width of neck at heel (where it joins the body) - 56.1mm
Depth of neck at heel (excluding fingerboard) - 19mm
Diameter of tuning holes - 8.5mm
Any order placed before 3.00pm on a working day will generally be sent the same day. If the order is placed after 3.00pm on a weekday or anytime during the weekend or a public holiday we will send the order the next working day.
If you need to return a product purchased from W.D. Music UK, please notify us in writing (email/letter) within 14 working days and then return the item to us within 28 working days in order to receive a full refund without the original delivery charge. The cost of returning the item to W.D. Music UK is not included unless the return is due to missing or faulty parts.
The returned goods must be in a re-saleable state and any goods or accessories that accompany the returned product must also come back to us. The goods should also be returned with their original box, packing and accessories. Please click here for further details.
PICKGUARDS: Do not remove the protective cover or place any components on this pickguard until you have made a "dry run" on the instrument. Make sure all mounting holes and pickup cuts are positioned correctly. Pickguard replacement warranty will be void if the protective cover has been removed. Removing the protective film means that the item is not in a re-saleable condition and therefore we cannot accept it back for a refund.
We offer Paypal as the payment gateway on our website.
PayPal accepts all major credit and debit cards and no cardholder information is ever passed unencrypted and any messages sent to our servers from PayPal are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to PayPal's servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.
When you pay with Paypal, all information is protected by SSL with an encryption key length of 168 bits (the highest level commercially available). Your personal information is stored on Paypal's servers and heavily guarded, both physically and electronically. To further shield your credit card and bank numbers, Paypal do not directly connect their firewall-protected servers to the internet.